Table of Contents
Advertisement
Messages
[Error] EXCEEDED TORQUE LIMIT
[Warn] EXCEEDED JOINT LIMIT
[Warn] EXCEEDED ASSIST LIMIT
SAIT‐IFU‐GEMS‐H Rev.1.1 (2019‐11)
Causes
When this message is displayed and the
device is stopped, the physical therapist
may try to start the device again by
pressing the "START" button on the tablet
PC.
If the problem persists, reboot the device
and the tablet PC. If there is still a
problem with the device, turn off the
device immediately and contact the
manufacturer.
When the joint angle reaches these joint
limits, the device ceases applying assistive
force. Thereafter, the physical therapist
may reset the device by asking the
patient to stand with upright posture and
tapping the "Set Stand Pose" button on
the tablet PC. Pressing the "START"
button will then cause the device to start
providing assistive force again.
Recommended action(s)
Page 68 of 79
Advertisement
Table of Contents
