Table of Contents
Advertisement
④ Dampen (but do not soak) a lint‐free cloth with purified water.
⑤ Wipe the surface of the device for at least five (5) minutes.
⑥ Let the device dry completely in air.
⑦ Store the device in its storage case provided until the next use.
8.4. How to charge the GEMS‐H
Property damage may occur when the charger cable receives any force!
If the charger cable receives any force when the terminal pin is plugged in, the connector of the charger cable
can be damaged beyond repair.
‐
Make sure that the charge cable does not receive any force when the terminal pin is plugged in.
① There is a terminal for charging on the right side of the control pack.
② Charging begins automatically when the charger cable is plugged in.
③ When charging, the LED lights on the charger are illuminated (see image below).
④ After the device is fully charged, the green charger LED will come on.
⑤ It takes about two hours to fully charge the device (50 minutes with a high‐speed charger), and the device may
be used for about two hours on a full charge.
⑥ The device may be left on while charging, but the user should not use the device while charging.
SAIT‐IFU‐GEMS‐H Rev.1.1 (2019‐11)
Page 63 of 79
Advertisement
Table of Contents
