3.5.2.1 Normal System Mode Tab
The Normal tab displays various faults, flags, and operational information. When the Normal tab is
selected, the unit is commanded to Normal System Mode.
Normal Mode –
System Faults:
Red Bold
Gray text indicates that there is no active fault.
(System Faults are described in the Self-Test section.)
Status Flags:
Black Bold text indicates that a flag is set.
Gray text indicates that the flag is not set.
(Status Flags are described in the Self-Test section.)
Traffic Mode Status:
Standby – Unit is not transmitting or receiving data
Operate – Unit is interrogating and processing received data
Test – Allows special transmit interrogation rates and data patterns to be initiated
(Selected mode is active.)
Ground Test:
Enabled
Disabled
(Ground Test is described in the Ramp Test and Return to Service Tests section.
GTS 8XX/GPA 65 Installation Manual
190-00587-00
Figure 3-3. GTS 8XX Install Tool – Normal Tab
text indicates that a fault is active.
Page 3-7
Revision 4TP