Panel Off Mode - Ricoh MT-C4 Manual

The machine enters panel off mode when one of the
following is done.
The panel off timer runs out after the last job.
The Energy Saver key is held down for a second.
The machine is still in the stand-by (ready) condition, but
turns off the LCD of the operation panel.
The machine recovers to the ready condition if one of the
following occurs:
The Energy Saver key is pressed
An original is placed in the ADF
The ADF is lifted
The user touches the operation panel
The front door is opened or closed
Slide 75
No additional notes
Energy Saver Modes

Panel Off Mode - 1

» The panel off timer is controlled by User Tools: Timer settings.
75
MT-C4 Training