Ricoh MT-C4 Manual page 46

Minor changes have been made to these replacement
procedures.
Paper feed
Fusing
Others
Slide 46
No additional notes
Modified Procedures - 2
» Tandem tray side-to-side registration adjustment: Layout of
the machine is different.
» Paper feed unit: D065 and D066 have 2 harnesses.
» Paper tray removal for trays 2 and 3 has changed
» New note added for paper feed roller replacement
– The feed rollers of the main machine and the LCT are not
interchangeable because they turn in different directions.
– After replacing a feed roller in the main machine, always
make sure that it turns counterclockwise in the direction of
paper feed.
– Do not touch the surface of the rollers with your bare
hands.
– Reset the PM count to zero for the new rollers
» Fusing Lamps, Hot Roller, and Pressure Roller
» Fusing/Exit Motor
» Ozone filters
» Circuit boards: All procedures changed
46
MT-C4 Training