Installation - SUNWIND El-dorado 720100 User Manual

Installation

The toilet is connected to an electric socket;
this MUST be a grounded outlet, with a min-
imum of a 10A slow fuse box. In the event
of any other appliances on the same circuit,
this should be at least 16A. Alternatively,
consult your electrician about installing a
separate circuit for the toilet. Avoid any use
of extension cords, power strips, or mul-
ti-outlet adapters.
Should the floor be slippery so that the toilet
may slide during visits, it should be secured
to the floor. Remember to ensure that there are no heating cables underneath the brackets
where you are securing the toilet. Brackets and screws are enclosed in the box for the toilet.
Unplug the toilet from the electric socket when it is not being used for an extended period of time.
The toilet is now ready for use. Connect the toilet to the
electric outlet and ensure that the on/off switch is in the
"ON" position. The toilet's combustion should be tested
prior to the first visit. To test the toilet, press the combus-
tion button located at the top of the toilet. Completing one
combustion takes about 75 minutes, after which the toilet
is ready for normal use.
English
Fixing
brackets for
the floor.
29