Chigo CCA-18HVR1 Technical Manual page 32

R410A50Hz Universal Outdoor Series Technical Manual
No.
1 E-parts box cover
2 Electric control components for indoor unit
2.1 The electric control board base
2.2 Relay
2.3 Terminal
2.4 Terminal
2.5 E-parts board for indoor unit
Temperature sensor
2.6
Temperature sensor
2.7
2.8 Welded chassis for E-parts box
3 Wind inlet guide assy
3.1 Wind inlet guide
4 Water pan components
4.1 Foam pendant
5 Centrifugal fan
6 Fan motor for indoor unit
7 Auxiliary fixing board for evaporator
8 Evaporator components
8.1 Insulating pipe
8.2 Insulating pipe
8.3 Evaporator attached cotton
8.4 Evaporator welding assy
8.4.1 Installation tube for probe
29
Part Name No.
8.4.2 Evaporator
8.4.3 Collecting pipe welding assy
8.4.4 Current divider capillary assy
8.5 Main fixing board
9 The chassis plate
10 Upper foam components
11 Pre-assembling assy for water pump
11.1 Water pump support
11.2 Water pump
11.3 Liquid-level sensor
11.4 Underlay for water pump support
12 Hanger
13 Rear brattice
14 Chassis assy
15 Discharge pipe joint
16 Side maintenance board for water pump
17 Front brattice
18 Lower pipe clamp
Lower pipe clamp(φ35)
19
20 Upper pipe clamp
Upper pipe clamp(φ35)
21
22 Valve panel
GUANGDONG CHIGO HEATING & VENTILATION EQUIPMENT CO., LTD.
Part Name