Chigo CCA-18HVR1 Technical Manual page 138

R410A50Hz Universal Outdoor Series Technical Manual
In dehumidifying mode and automatic mode, pressing the key cannot change the temperature. In other mode,
press the key once and the temperature will increase 1℃ in the order: 16℃→17℃→...→31℃→32℃.
E. SWING key:
In dehumidifying mode, the swing mode is in the stable wind mode without change. In other mode, press the
key to switch modes in the order: swing → stable wind→ natural wind →swing
F. AIR FLOW key:
The default air flow is in the swing mode when starting firstly and press the key to switch modes in the order:
swing →stop →swing.
G. WIND SPEED key:
The default wind speed is in the automatic wind mode when starting firstly. The remote control won't react by
pressing the key because the wind speed can't be adjusted and in low speed in dehumidifying mode. In other
mode, press the key to switch modes in the order: Automatic wind→ high speed →middle speed→ low speed
→automatic wind
H. TIMER key:
The default mode is in no timing state, press the key to set timing time with hour as its union. The switch order
is: 1H→2H→...→24H→cancel→1H.... Press the key to set timing starting in the off state and set timing
stopping in the on state. After setting timing function, the time keeps decreasing per hour until the time
decreasing to the timing on or timing off and the timing display will be cancelled at the same time. Pressing
MODE key can't cancel timing in timing mode which will send out the order of timing time by pressing other key.
I. TURBO key:
The default state for the control is no turbo and the key don't work in the automatic mode, dehumidifying mode
and ventilating mode (It will not display any contents and not send out any codes). The control, however, will
switch between on and off by pressing the key in other mode. The wind speed isn't indicated in turbo mode and
it will be cancelled for changing modes and setting sleep mode.
J. SLEEP key:
Press the key to switch modes in the order: sleep→ cancel sleep→ sleep. The sleep function won't be cancelled
for changing modes. Press the key to set sleep mode and the wind speed will automatically be switched to low
speed and it can adjust the wind speed by pressing the WIND SPEED key (except dehumidifying mode).
K. LOCK key:
The default state is in no LOCK key state, press the key to select modes in order: LOCK key →cancel LOCK
key→ LOCK key; In LOCK key mode, all keys except LOCK key of the remote control can't work . (NOTE: In
LOCK key mode, the remote and operation panel of the unit both will be locked automatically by pressing the
key and press the key again, they will be unlocked. As for the split unit, it only holds the control rather than
urgent keys and the panel will make a reaction.)
L. LAMP key:
The default state is in no LAMP key state, press the key to select modes in order: LAMP key →cancel LAMP
key→ LAMP key; In LAMP key mode, pressing MODE key can't cancel the show of LAMP key.
M. CLEAN key:
The default state is in no purification state, press the key to select modes in order: CLEAN →cancel CLEAN→
CLEAN; In purification mode, pressing CLEAN key can't cancel purification function. Press the key when the
remote control is closed, the control will switch modes in the order: CLEAN →cancel CLEAN→ CLEAN; when
you stop the unit and turn on the purification switch, except the wind, the stable swing and air door swing speed
aren't adjusted.
GUANGDONG CHIGO HEATING & VENTILATION EQUIPMENT CO., LTD.
135