Table of Contents
Advertisement
When the low-beam headlamps are on, push the turn
I
t i s feature lets you use the high-beam headlamps to
signal lever away from you to change the headlamps to
signal the driver in f m ~ t of
YOU
that
YOU
Want to Pass-
-.
high beam.
Pull the turn signal lever toward you briefly to
This light on the instrument
flash-to-pass. When you do, the following will occur:
panel cluster will be on,
If the headlamps are either off or in the Daytime
indicating high-beam
Running Lamps (DRL) mode, the high-beam
usage.
headlamps will turn on. They'll stay on as long as
you hold the lever there. Release the lever to
turn them off.
Pull the turn signal lever toward you to return to
low-beam headlamps.
If the headlamps are on low beam, they will remain
active and the high beam will also illuminate until
you release the lever.
3-9
Advertisement
Chapters
Table of Contents
