Table of Contents
Advertisement
4. With the coolant surge tank
pressure cap off, start
5. Then replace the pressure cap. Be sure the
the engine and let it run until you can feel the upper
pressure cap is hand-tight and fully seated.
radiator hose getting hot. Watch out for the
Start the engine and allow it to warm up. If the CHECK
engine cooling fans.
COOLANT LEVEL message does not appear on the
By this time, the coolant
level inside the coolant Driver
Information Center, coolant is at
the proper
surge tank may be lower.
If the
level is
lower,
add
fill level. If a CHECK COOLANT
LEVEL message does
more of the proper mixture to the coolant surge
appear, repeat Steps 1 to 3 and reinstall the pressure
tank until the level reaches at or above the fill mark
cap or see your dealer.
at the forward edge of the surge tank.
5-37
Advertisement
Chapters
Table of Contents
