Cadillac 2003 Seville Owner's Manual page 186

TONE: Press and release this button until the desired
tone control (bass, treble or midrange) appears on
the display. The radio keeps separate tone settings for
each band, preset and source.
-
LEVEL
+:
After selecting the desired tone control,
press the plus or minus symbol on this button to select
the desired level.
To save the tone settings for your presets, press and
hold the numbered pushbutton for the desired preset for
more than two seconds until you hear a beep.
Adjusting the Speakers (Balance/Fade)
4
(Speaker): Press and release this button until the
desired control (balance or fade) appears on the display.
-
LEVEL +: After selecting the desired control, press
the plus or minus symbol on this button to select
the desired level.
PTY (Program Type): This button is inoperable on this
radio, except if your radio
is
equipped with XMTM
Satellite Radio Service.
-
I
o seiect and find a desired PTY perform the following:
1. Press PTY. PTY will be displayed on the screen.
2. Select a category by pressing
-
LEVEL
+.
3. Once the desired category is displayed, press
TUNE/SEEK to select the category and take
you to the category's first station.
4. If you want to go to another station within that
category, press TUNE/SEEK once to display
the category, then press TUNE/SEEK again to go
to another station.
5. If PTY times out and is no longer on the display, go
back to Step 1.
SCAN: You can also scan through the channels within
a category by performing the following:
1. Press PTY. PTY will be displayed on the screen.
2. Select a category by pressing
-
LEVEL
+.
3. Once tne desired category is displayed, press
SCAN, and the radio will begin scanning within
your chosen category.
4. Press SCAN again to stop at a particular section.
3-75