Download Print this page
dreambaby Royale Converta F849 Instructions

dreambaby Royale Converta F849 Instructions

3-in-1 play-pen gate

Advertisement

Quick Links

Y
Thread lower mount
onto vertical bar
M
SIDE
Install floor cap
under lower hinge
P
Insert upper mount
onto upper securing hinge
L
Insert vertical bar
into lower hinge
F
Insert securing screw
and position in place with Allen Key
D
7
Align both sides with template
and affix with screws
.
N
x 8
N
Wood Screws
8
Position barrier gate/fireplace barrier into desired shape,
then lock and secure by firmly tightening all securing screws
using Allen Key
.
Q
GATE OPERATION
Slide the release switch
H
and lift gate panel
Gate swings in both directions.
I
Swing gate closed ensuring upper
and lower
Swing gate fully open to engage SMART STAY OPEN feature.
Caution: Keep gate closed when children are present.
MAINTENANCE & CARE
• Play-Pen/Fireplace Barrier/Barrier Gate must be fitted according to instructions to ensure it works correctly.
• Regularly check all parts to ensure Play-Pen/Fireplace Barrier/Wide Barrier Gate is secure. Adjust as required.
• Only use Dreambaby
spare parts.
®
• To clean, wipe surface with a damp cloth using mild detergent and warm water.
Never clean with abrasive, ammonia, bleach or spirit based type cleaner.
Look for the Dreambaby
range of Child Safety and Care Products.
®
Tee-Zed acknowledges that its customers may be entitled to statutory consumer guarantees and does not seek to exclude or limit them. These guarantees include that Tee-Zed's products are of acceptable quality. This Tee-Zed product is
for the specific purpose detailed in the instructions and packaging and Tee-Zed considers use outside of that purpose to be abnormal use. To the maximum extent permitted by law, Tee-Zed does not accept any liability for damage:
• arising from abnormal use of the products;
• caused by installation or removal of the products other than in accordance with the supplied installation and removal instructions; or
• arising under the law of tort or contract.
Dreambaby
products by
®
Tee-Zed Products Pty Ltd
Tee-Zed Products (N.Z.) Ltd
Tee-Zed Products Ltd
PO Box 2022,
PO Box 64013,
PO Box 29227,
Botany Town Centre Auckland
Dunfermline, KY12 2DN
Bondi Junction NSW 1355
New Zealand
United Kingdom
Australia
+64 (0)9 274 8788
 +44 (0)844 800 9445
 +61 (0)2 9386 4000
 info@tee-zed.co.uk
 info@tee-zed.co.nz
 info@tee-zed.com.au
www.dreambaby.co.uk
www.dreambaby.co.nz
www.dreambaby.com.au
.
F
.
E
and hold in place.
C
and upper mount
.
E
L
.
Q
Wood screws
N
included.
For Brick or Masonry use the
appropriate fittings, screws and
plugs for your wall (not included)
D
A
.
1
J
locks engaged.
2
Made in Zhejiang, China.
©2018 Tee-Zed Products Pty Ltd
INSTRUCTIONS:
Royale Converta
•Play-Pen •Fireplace Barrier •Wide Barrier Gate
IMPORTANT! KEEP FOR FUTURE REFERENCE.
Read INSTRUCTIONS thoroughly before assembling and installing gate.
If you sell or give away this product, make sure you give this Instruction to the new owner.
Complies with Standards: EN 12227:2010.
WARNING
WARNING − Do not place the Play-Pen close to an open fire or other heat source.
WARNING − Do not use the Play-Pen without the base.
The following warning is only applicable for folding Play-Pens:
WARNING − Ensure that the Play-Pen is fully erected and all the locking mechanisms engaged
before placing your child in this Play-Pen.
• Suitable for children up to 24 months.
• Ensure the Fireplace Barrier is installed at least 60cm/23.5in from fire source.
• This product does not replace adult supervision. Never leave a child unattended.
• Never use with a child able to climb over or dislodge the Play-Pen/Fireplace Barrier/Wide Barrier Gate.
• Do not use at the top of stairs.
WARNING: This package contains small parts and sharp points in an unassembled state.
Keep out of reach of children. Adult assembly required.
COMPONENTS
A
Gate Panel
B
Barrier Panel
C
Upper Securing Hinge
D
Securing Screw
E
Lower Hinge
F
Vertical Bar
G
Vertical Bar Top Casing
H
Gate Release Switch
I
Gate Upper Lock
J
Gate Lower Lock
B
Wall Mounting Parts
K
Upper Mount ( Side X)
L
Upper Mount ( Side Y )
M
Lower Mounts
N
Wood Screws (1.5in/38mm)
O
Lower Hinge Cap (Installed)
P
Floor Cap
Required for Assembly/mounting
Q
Allen Key (4mm)
x 1
x 1
x 2
K
L
M
F849.F2003.F2161_Royale Converta
3-in-1 Play-Pen Gate
®
D
D C
H
I
B
A
B
E
J
NOTE:
Store Allen Key safely
out of reach of children.
Keep for future use.
x 8
x 1
x 1
x 1
N
O
P
Q
Wood Screws
®
IM_17.7.2018_X.02
F849
F2003
F2161
G
F
F

Advertisement

loading
Need help?

Need help?

Do you have a question about the Royale Converta F849 and is the answer not in the manual?

Questions and answers

Summary of Contents for dreambaby Royale Converta F849

  • Page 1 Wall Mounting Parts • Regularly check all parts to ensure Play-Pen/Fireplace Barrier/Wide Barrier Gate is secure. Adjust as required. Upper Mount ( Side X) Upper Mount ( Side Y ) • Only use Dreambaby spare parts. ® Lower Mounts • To clean, wipe surface with a damp cloth using mild detergent and warm water.
  • Page 2 PLAY-PEN ASSEMBLY BARRIER GATE OR FIREPLACE BARRIER INSTALLATION CAUTION: Ensure fireplace barrier is installed at least 60cm/23.5in from fire source. Remove Play-Yard from packaging and place upright on flat surface. Ensure the surface you mounting the barrier is structurally sound such as solid timber, brick or masonry. Position panels to desired shape.

This manual is also suitable for:

Royale converta f2003Royale converta f2161