Flash-To-Pass
This feature lets you use the high
signal the driver in front of you that you want to pass.
Pull the turn signal lever toward you briefly to
-
-
flash
to
pass. When you do:
D
If the headlamps are either off or in the Daytime
Running Lamps (DRL) mode, the high
headlamps will turn on. They'll stay on as long as
you hold the lever there. Release the lever to turn
them off.
D
If the headlamps are on low beam, they will remain
active and the high beam will also illuminate until
you release the lever.
-
beam headlamps to
-
beam
Windshield Wipers
You can control the windshield wipers by moving
the lever with the wiper symbol on it. This lever is
located on the right side of your steering column.
-
For information on wiper
-
refer to "Wiper
Activated Headlamps" in the Index.
activated headlamp operation,
2-37