How To Add Fluid - Cadillac 2000 Seville Owner's Manual

Table of Contents

Advertisement

4. Check both sides of the dipstick, and read the
lower level. The fluid level must be in the
-
cross
hatched area.
5. If the fluid level is in the acceptable range, push
the dipstick back in all the way. Replace the air
cleaner/filter assembly.

How to Add Fluid

Refer to the Maintenance Schedule to determine what
kind of transaxle fluid to use. See "Recommended Fluids
and Lubricants" in the Maintenance Schedule booklet.
If the fluid level is low, add only enough of the proper
fluid to bring the level into the cross
the dipstick.
1. Pull out the dipstick.
2. Using a long
3. After adding fluid, recheck the fluid level as
4. When the correct fluid level is obtained, push the
-
hatched area on
-
neck funnel, add enough fluid at the
dipstick hole to bring it to the proper level.
It doesn't take much fluid, generally less than
one pint (0.5 L). Don't overfill.
NOTICE:
We recommend you use only fluid labeled
R
-
DEXRON
III, because fluid with that label is
made especially for your automatic transaxle.
Damage caused by fluid other than DEXRON
is not covered by your new vehicle warranty.
described under "How to Check."
dipstick back in all the way.
R
-
III
6-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Seville

Table of Contents