Table of Contents
Advertisement
NOTICE:
Continuing to drive with worn
could result in costly brake repair.
Some driving conditions or climates may cause a brake
squeal when the brakes are first applied or lightly
applied. This does not mean something is wrong with
your brakes.
Properly torqued wheel nuts are necessary to help
prevent brake pulsation. When tires are rotated, inspect
brake pads for wear and evenly torque wheel nuts in the
proper sequence to GM specifications.
Brake linings should always be replaced as complete
axle sets.
See "Brake System Inspection" in the
Maintenance Schedule booklet under Part C
"Periodic Maintenance Inspections."
6-32
-
out brake pads
Brake Pedal Travel
See your dealer if the brake pedal does not return to
normal height, or if there is a rapid increase in pedal
travel. This could be a sign of brake trouble.
Brake Adjustment
Every time you apply the brakes, with or without the
vehicle moving, your brakes adjust for wear.
Replacing Brake System Parts
The braking system on a vehicle is complex. Its many
parts have to be of top quality and work well together if
the vehicle is to have really good braking. Your vehicle
was designed and tested with top
parts. When you replace parts of your braking
--
system
for example, when your brake linings wear
down and you have to have new ones put in
you get new approved GM replacement parts. If you
don't, your brakes may no longer work properly. For
example, if someone puts in brake linings that are wrong
for your vehicle, the balance between your front and
--
rear brakes can change
performance you've come to expect can change in many
other ways if someone puts in the wrong replacement
brake parts.
-
quality GM brake
--
be sure
for the worse. The braking
Advertisement
Table of Contents
