Memory Seat And Mirrors - Cadillac 2000 Catera Owner's Manual

Memory Seat and Mirrors

After adjusting the driver's seat to a comfortable position,
also adjust the interior and exterior mirrors. To program
the memory seat and mirrors, press memory button "M"
and memory button "1" at the same time and hold
for five seconds.
1-4
These buttons are located on the outboard side of
the driver's seat. Seat and mirror positions may be
programmed for two additional drivers by repeating the
above steps and pressing memory button "2" or "3"
instead of memory button "1."
If your vehicle is in PARK (P), you can recall mirror
and seating positions by pressing and holding one of
the three memory buttons. This will adjust the seat
and mirrors to where you have previously programmed
them. Seat and mirror movement is immediately stopped
if the memory button is released or if a seat or mirror
control is moved.
Also note that if you try to adjust the driver's memory
seat and it doesn't move, try opening the driver's door.
This will reactivate power to the driver's seat. (Power to
the driver's seat "times out" after 30 seconds. Power
to the passenger's seat is always present.)