Curb View Assist Mirror; Memory Seat And Mirrors - Cadillac 2005 CTS Personalization Manual

The mirrors can be folded manually
inward to prevent damage in car
washes or garages. Return the
mirrors to their normal positions
before driving. The mirrors also are
heated to clear fog, snow or ice
when the rear defogger is on. Refer
to Comfort/Convenience section of
this guide.

CURB VIEW ASSIST MIRROR

(if equipped)
If your CTS is equipped with the
Memory Seat and Mirrors option, it
will also have the Curb View Assist
feature. When activated through the
Driver Information Center (DIC), the
passenger's mirror will tilt to a
pre-selected position when the
vehicle is shifted into reverse to
assist the driver when parallel
parking. If further adjustment is
needed, the standard power controls
can be used. Five seconds after
shifting out of reverse, the mirror will
return to its original position. The
curb view assist feature can be
enabled/disabled through the DIC.
C T

MEMORY SEAT AND MIRRORS

Setting Driver's Position
The buttons to set the seat and
mirror memory are on the driver's
armrest. To set the memory, first
ensure that seats and mirrors are
"On" in the Personalization section of
the DIC. Then, adjust the driver's
seat, including the seatback recliner
and both outside mirrors.
1. Press and hold button 1 until two
beeps are heard to confirm
memory setting.
2. Repeat the procedure using button
2 to store memory for a second
driver.
1
2
S
Setting Exit Position
1. Press button 1 or the unlock
symbol on the keyless entry fob
with number 1 on the back.
Adjust the driver's seat to the
desired exit position.
3. Press and hold the exit button
until two beeps are heard to
confirm exit memory setting.
Repeat the procedure for a second
driver using button 2 or the unlock
symbol on the keyless entry fob
with 2 on the back.
To recall stored exit positions, press
and release the exit button. A beep
will sound and the seat will move to
the memory exit position for the
identified driver. If no exit position is
stored, the seat will move all the way
3
back.
Vehicles with automatic transmissions
must be in Park to recall exit
positions. For manual transmissions,
the parking brake must be set if the
engine is running.