Connecting Feature Or Twinaxial Cables To A Network Or Device - IBM eserver iSeries Setting Up

Note: If the Installed Release column does not show on the Display Installed Licensed
Programs display, press F11 once or twice to show it. F11 is a three-way toggle key
that shows the installed release, the product option, and the installed status.
4) Find the VRM level for the Operating System/400
f. Press Enter.
g. The Verify Contact Information display appears.
Press Enter to accept the information.
h. The Select Reporting Option display appears.
Select Send service request now and press Enter.
Messages showing the status of the request will appear at the bottom of the display.
i. Type dspptf 5769ss1 sf99410 on the command line and press Enter to display the PSP cover
letter.
You have completed the test of the electronic customer support remote services.
__ 11. Press Enter.
__ 12. Continue with "Connecting feature or twinaxial cables to a network or device."

Connecting feature or twinaxial cables to a network or device

__ 1. Do you have other feature cables to connect to a network or device?
Yes No
Go to "Ordering program temporary fixes" on page 13.
↓
__ 2. Power down the system, if not already powered down.
__ 3. Type pwrdwnsys *immed.
__ 4. Press Enter.
__ 5. Do you have a twinaxial cable to connect?
Yes No
Connect the feature cable to a network or device. Use the information that came with that
↓
network or device to help you connect your cable. Go to step 7 on page 13.
Setting Up Electronic Customer Support
®
entry.
Getting your twinaxial system running
11