CALCULATING THE ADJUSTMENT FACTOR FOR SETTING A
Use the following guide as a starting point:
For 3/8" thick bar bent on 1-1/2" diameter die -
For 1/2" thick bar bent on 3" diameter die -
For 3/4" thick bar bent on 4-1/2" diameter die -
For 1" thick bar bent on 6" diameter die -
REFERENCE STOP FOR BENDING
L minus 1-1/4" = M
L minus 2-1/4" = M
L minus 3-1/4" = M
L minus 4-1/4" = M