Advertisement
DAB Radio Menu
Whilst listening to the DAB radio press and hold the Info/Menu button (4) for 2 seconds to enter the
DAB radio menu.
Use the TUNE- (10) and TUNE+ (11) buttons to scroll through the various menu options, press the
SELECT/SNOOZE button (7) to select the desired option:
a. Full scan – Re-scans and refreshes the DAB band for stations, press the SELECT/SNOOZE button (7) to
select Full scan.
b. Manual Tune – Enables manual DAB radio tuning. Use the TUNE- (10) and TUNE+ (11) buttons to
scroll through the frequencies, press the SELECT/SNOOZE button (7) to select the desired frequency.
c. DRC – Dynamic Range Control is a feature that some DAB stations use to even out the audio levels
between the quiet and loud segments of a broadcast. Use the TUNE- (10) and TUNE+ (11) buttons to
select 'High', 'Low' or 'Off', press the SELECT/SNOOZE button (7) to select the DRC mode.
d. Prune – Use the TUNE- (10) and TUNE+ (11) buttons to select 'Yes' or 'No', press the SELECT/SNOOZE
button (7) to select.
Note on Prune: If the radio is only receiving a partial signal and does not play but it is strong enough
to register in the station list, it will be displayed with a '?' at the front of the station name. These
stations will be removed by selecting prune.
e. System – Use the TUNE- (10) and TUNE+ (11) buttons to select the following options, press the
SELECT/SNOOZE button (7) to select:
• Sleep –
The sleep timer allows you to listen to music for a set time before the radio turns itself off automatically.
Use the TUNE- (10) and TUNE+ (11) buttons to select from Sleep Off, 15, 30, 45, 60, 90 minutes press the
SELECT/SNOOZE button (7) to confirm how many minutes the radio will be on for until it turns off.
• Alarm –
See 'Setting and Using the Alarm Function' below.
• Time –
Press SELECT/SNOOZE (7) to enter option. Press the TUNE buttons (10 or 11) to select:
Date and Time/Auto update/Set 12 or 24 hour/Set date format. Press SELECT/SNOOZE (7) to select
the desired option.
• Backlight –
Press SELECT/SNOOZE (7) to enter options. Press the TUNE buttons (10 or 11) to select one of the
following options:
1. Timeout. (This determines how long the LCD Display (15) stays illuminated). Select from 10, 20, 30, 45,
60, 90, 120, 180s or On (continuously illuminated). Press SELECT/SNOOZE (7) to select the desired
option.
2. On level. (This determines how bright the LCD Display (15) is when illuminated). Select from High,
Medium or Low. Press SELECT/SNOOZE (7) to select the desired option.
3. Dim level. (This determines how bright the LCD Display (15) when it has dimmed after Timeout or in
standby). Select from High, Medium or Low. Press SELECT/SNOOZE (7) to select the desired option.
• Inactive Standby –
(This option will turn the radio off after a preselected amount of time) Select from 2, 4, 5, 6hrs or Off
(switches Inactive Standby off).
• Factory Reset –
Restores the radio back to the original manufacturer's settings.
• SW Version –
Displays the current software installed in the radio.
8
Advertisement
