Advertisement
Using the DAB Radio
Listening to the DAB Radio
1. Ensure that the Telescopic Aerial (18) is fully extended.
2. Ensure the internal battery is fully charged as described above.
3. Briefly press the On/Off/Standby button (16) on the top panel to power the radio up:
4. The radio will automatically scan the airwaves for DAB stations if the radio is being used for the first
time:
5. After scanning, the radio will default to the first alphanumerical DAB radio station it finds:
6. Press the TUNE- (10) and TUNE+ (11) controls to tune to the desired DAB radio station. Once the
station has been found press the SELECT/SNOOZE button (7) to select the station.
7. Adjust the volume using the VOL- (8) and VOL+ (9) controls to decrease and increase the volume
level.
Saving up to 10 DAB radio stations using the preset function
1. First tune the radio to the desired station as described above.
2. Press and hold the Preset button (6) to enter Preset Store mode:
3. Press the TUNE- (10) and TUNE+ (11) buttons to scroll through the presets.
NB if a preset is empty and there is no station saved the preset will show as '(Empty)' as shown
above, preset 4 is shown in this example.
4. After selecting the desired preset press the SELECT/SNOOZE button (7) to save the tuned station into
the preset selected – the LCD Display (15) will show 'Preset x stored' to confirm. NB x = preset
number chosen as below:
6
Advertisement
