Advertisement
Setting and Using the Alarm Function
1. Press and hold the INFO/MENU button (4) for 2 seconds to enter the radio menu.
2. Press the TUNE- (10) and TUNE+ (11) buttons until 'System' is shown on the LCD Display (15), next
press the SELECT/SNOOZE button (7) to enter the system mode.
3. Press the TUNE- (10) and TUNE+ (11) buttons until "Alarm" is shown on the LCD Display (15) –
press the SELECT/SNOOZE button (7) to select setting the alarm. "Alarm 1 Setup" will be shown
on the LCD Display (15).
4. Press the TUNE (10 & 11) buttons to select Alarm 1 or Alarm 2, press the SELECT/SNOOZE button
(7) to select the alarm to be programmed.
The alarm hour digits will now flash.
5. Press the TUNE buttons (10 & 11) to adjust the alarm hour, press the SELECT/SNOOZE button (7)
to set the alarm hour.
The alarm minute digits will now flash.
6. Press the TUNE buttons (10 & 11) to adjust the alarm minutes, press the SELECT/SNOOZE button
(7) to set the alarm minutes.
The alarm Duration time will now flash.
7. Press the TUNE buttons (10 & 11) to adjust the alarm Duration time, select from 15, 30, 45, 60, 90
or 120 minutes, press the SELECT/SNOOZE button (7) to set the Duration time.
The alarm Source will now flash.
8. Press the TUNE buttons (10 & 11) to select the alarm source as Buzzer, DAB or FM radio, press the
SELECT/SNOOZE button (7) to set the alarm source:
a. If Buzzer is the wake-up source selected, press the TUNE buttons (10 & 11) to select when you
require the alarm to sound: Daily, Once, Weekends or Weekdays. Press SELECT/SNOOZE (7) to
select the option.
b. If DAB or FM wake up source is selected, press the TUNE buttons (10 & 11) to select from the
'Last listened' radio station or one of the radios presets. Press SELECT/SNOOZE (7) to select the
option. Next select when you require the alarm to sound: Daily, Once, Weekends or Weekdays.
Press SELECT/SNOOZE (7) to select the option.
9. Set the alarm volume using the TUNE buttons (10 & 11), press SELECT/SNOOZE (7) to set the
alarm volume.
10. Finally use the TUNE buttons (10 & 11) to select Alarm 'On' or 'Off', press SELECT/SNOOZE (7) to
set the alarm. The LCD Display (15) will show "Alarm Saved".
Once the alarm(s) is set, and the radio is in Standby, the alarm bell icon(s) will be shown on the right
of the LCD Display (15).
NB The alarm volume will steadily increase from low to high once the alarm has sounded.
Silencing the alarm
Press the On/Off/Standby button (16) on the top panel to silence the alarm.
Snooze Mode
After the alarm sounds, the SELECT/SNOOZE button (7) can be pressed to snooze the alarm. The
alarm will be silent for a further 5 minutes before sounding again, the LCD Display (15) will show the
snooze countdown.
Press the On/Off/Standby button (16) to cancel the snooze mode and alarm.
11
Advertisement
