Table of Contents
Advertisement
06_phone_functions.fm Page 35 Friday, April 7, 2000 5:25 PM
Press
and you could select the following options, including:
Redial
: Automatically redials the last number
Show ID
: This option allows you to make a call without the remote receiver getting information
of your phone number.
Hide ID
: This option allows you to make a call without the remote receiver getting information
of your phone number.
Switch to Line 2
: SIM card can have 2 numbers to be used. They are Line 1 and Line 2. This
option is used to when choosing the first number or the second number to be used for dialing.
A
This option will only be available provided that it is supported by your Cellular Service
Provider and that you have subscribed it from your service provider.
International Direct Dialing Call
This allows you to call from any country without knowing the local international access code.
Simply add the international dialing prefix
number to make an international call.
Inserting Pauses for Dialing Extensions or Voice Message Center
To insert a three-second pause character in a phone number:
At the position where the pause is reached, the phone will wait for 3 seconds before it proceed
to dial the rest of the dialling string. However, the first pause in the dialling string is an
exception. When the pause is reached, the phone will wait until the call is answered.This is used
for example, if after the phone number 765-4321, you wish to insert a pause, then dial 7227 so
that you will be transferred directly to the extension 7227 of the phone number 765-4321.
Pause--A Working Example:
If you have a tone-based voicemail system on 555-8888 with a mailbox number of 1111 and
password of 2222. Then you may dial the following number:
555-8888 [xx] 1111 [xx] 2222 OK
My Number
: To display your own phone number.
Prepaid Card
: Show the total remaining amount the card is having. The rate depends on the
rate preset in the device.
During Conversation Functions
A
Some services will only be available provided that you have subscribed them from
your Cellular Service Provider Provider and if the Cellular Service Provider is having this
service.
Press
End
to stop the dialing and end the call.
Hold
Press
to put the call on hold
Press
to put the call on hold and change into the Dial Pad(the Function Icon will show
indicating that the call has been put on hold). You may then dial another number.
Press
to select the following options:
Mute
Turns Mute On or Off.
This function temporarily turns the microphone off during a phone call. Reselect this option to
resume your conversation.
Transfer
This option transfers a call to another telephone.
New Call
This function allows you to make a new call.
+
, followed by the country code and the phone
,
35
Phone Functions
Advertisement
Table of Contents
