Using The Screen Settings - Sony BRAVIA KDL-32BX330 Operating Instructions Manual

Using the Screen Settings

Option
Wide Mode
Auto Wide
PC Settings
• Normal is not available when you are watching a 720p, 1080i or 1080p source.
• For the PC Input Signal Reference Chart, see page 35.
• Auto Adjustment, Phase and Pitch are not available with PC signal connected to HDMI input.
28
Description
Wide Zoom Fills the screen with minimum distortion.
Normal
Select to display 4:3 picture in original size when the original source is 4:3.
Full
Select to enlarge the picture horizontally to fill the screen when the
original source is 4:3 (Standard definition source). When the original
source is 16:9 (High-definition source), select this mode to display the
16:9 picture in its original size.
Zoom
Select to enlarge the original picture without distorting the aspect ratio.
On Select On to automatically change Wide Mode setting based on the
content.
Off If frequent screen changes are disturbing to you, select Off. Choose one
of the Wide Mode options when this function is set to Off.
When a PC is connected to the TV and the PC input is selected, the PC settings screen
appears instead of the Screen settings.
Wide Mode Normal
Full 1
Full 2
Auto
Select to automatically adjust the display position and phase of the
Adjustment picture when the TV receives an input signal from the connected PC.
Note that Auto Adjustment may not work well with certain input
signals. In such cases, manually adjust the options below.
Phase Adjust after Pitch to fine tune overall sharpness.
Pitch
Adjust uneven sharpness on screen.
Horizontal Allows you to move the position of the picture left and right.
Center
Vertical
Allows you to move the position of the picture up and down.
Center
Select to display in the original image size.
Select to enlarge the picture to fill the display area,
keeping its original aspect ratio.
Select to enlarge the picture to fill the display area.