Using The Screen Settings - Sony KDL-32BX310 Operating Instructions Manual

Using the Screen Settings

Option Description
Wide Mode Wide Zoom Fills the screen with minimum distortion.
Normal
Full
Zoom
Auto Wide On
Off
PC Settings When a PC is connected to the TV and the PC input is selected, the PC settings screen
appears instead of the Screen settings.
Wide Mode Normal
Auto
Adjustment
Phase
Pitch
Horizontal
Center
Vertical
Center
• Normal is not available when you are watching a 720p, 1080i or 1080p source.
• For the PC Input Signal Reference Chart, see page 36.
• Auto Adjustment, Phase and Pitch are not available with PC signal connected to HDMI input.
Select to display 4:3 picture in original size when the original source is 4:3.
Select to enlarge the picture horizontally to fill the screen when the
original source is 4:3 (Standard definition source). When the original
source is 16:9 (High-definition source), select this mode to display the
16:9 picture in its original size.
Select to enlarge the original picture without distorting the aspect ratio.
Select On to automatically change Wide Mode setting based on the
content.
If frequent screen changes are disturbing to you, select Off. Choose one
of the Wide Mode options when this function is set to Off.
Select to display in the original image size.
Full 1 Select to enlarge the picture to fill the display area,
keeping its original aspect ratio.
Full 2
Select to enlarge the picture to fill the display area.
Select to automatically adjust the display position and phase of the
picture when the TV receives an input signal from the connected PC.
Note that Auto Adjustment may not work well with certain input
signals. In such cases, manually adjust the options below.
Adjust after Pitch to fine tune overall sharpness.
Adjust uneven sharpness on screen.
Allows you to move the position of the picture left and right.
Allows you to move the position of the picture up and down.
29