Locating Inputs And Outputs - Sony KDL-32BX310 Operating Instructions Manual

Locating Inputs and Outputs

Rear Panel
Item
1 HDMI IN 1/2
2 PC IN (RGB)
3 VIDEO IN/
COMPONENT
IN/R-AUDIO-L
(MONO)
8
Description
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports
enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI
cable that bears the HDMI logo.
Use the HDMI IN 1 port when connecting DVI equipment. Use a DVI-to-HDMI
cable or adapter (not supplied). Equipment using a DVI connection also requires an
additional audio connection using an audio cable connected to PC/HDMI 1 AUDIO
IN of PC IN.
Connects to a personal computer's video and audio output connector. Can also be
connected to other analog RGB equipment. See "PC Input Signal Reference Chart"
on page 36 for the signals that can be displayed.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD15-HD15 cable.
You may need to adjust the TV settings or your PC's resolution and timing. See
page 13 for information on how to setup your PC to this TV.
This input port can be used as a composite video input (VIDEO) or as a component
video input (COMPONENT). For composite use, connect the yellow jack to Y for
video and use audio L (mono) and R for audio signal. For component connection,
use Y, P , P for video signals and also connect the audio L (mono) and R for audio
B R
signal.
This TV can auto detect and switch between the VIDEO and COMPONENT when
VIDEO or COMPONENT is connected.