Turning On The Device; Using The Touchscreen - Accent 800 User Manual

Turning on the Device

1. Press and hold the power button located on the top edge of the device. When you hear a beep,
release the button. The green power LED will illuminate. The LED will remain illuminated while the
device is on and while the device is in sleep mode.
2. Wait for the NuVoice® software to load. This will take about 45 seconds.
3. First time only: Review the NuVoice Software Agreement and select I Agree. The Exploration Wizard
will load.
4. Once the Exploration Wizard loads, check the battery status level. For details, see "Charging the
Battery" on page 11.

Using the Touchscreen

Important! Do not use sharp, pointed objects on the touchscreen. The touchscreen is designed to be used
with your finger or the stylus that came with your device. This stylus is made specifically for a capacitive
touchscreen. Anything else will harm your touchscreen and may cause your device to stop working.
The touchscreen is a liquid crystal display (LCD). Should the display break (unlikely except in extreme
circumstances) and you come into contact with the liquid crystal, wash and rinse your skin thoroughly. Be
careful to avoid splintered glass.
The touchscreen is very sensitive. Fingerprint smears, dust, grime, saliva, etc. will affect its performance.
The screen also reacts to raindrops and extremes in temperature (condensation).
To dust the touchscreen, use a soft, lint-free cloth. For heavier cleaning, use a slightly dampened, lint-
free cloth and then dry the screen with another soft, lint-free cloth.
Accent 800 User's Guide: NuVoice 10