Turning On The Device; Putting The Device To Sleep/Waking The Device; Restarting The Device; Powering Off The Device - Accent 800 Getting Started

Turning on the Device

1. Press and hold the power button located on the top edge of the device. The green power LED will
illuminate. The LED will remain illuminated while the device is on and while the device is in sleep mode.
2. Wait for the NuVoice® software to load. This will take about 45 seconds.
3. First time only: Review the NuVoice Software Agreement and select I Agree. The Exploration Wizard
will load.
4. Once the Exploration Wizard loads, check the battery status level. For details, see "Charging the
Battery" on page 13.

Putting the Device to Sleep/Waking the Device

When you finish using the device for the day, put it in sleep mode overnight. To put the device to sleep,
do either of the following:
Quickly press and release the power button or
•
Select the Sleep key in the NuVoice Toolbox
•
When the device is inactive for a prolonged period, it will go into sleep mode automatically. The green
power LED will remain illuminated while the device is in sleep mode. To wake the device, do either of
the following:
Select the Tools key on the front of the device or
•
Quickly press and release the power button
•
Note: The device may wake up if a NuEye module is attached or if Windows® updates are set to install
automatically. To preserve the charge overnight, either connect the charger or power off the device.
Transporting the device in a carry case may also wake it. In that case, power off the device.
Note: To change power button operation in the NuVoice software, see "Managing Power Settings" in the
Accent 800 Hardware Manual. Download the manual from https://www.prentrom.com/support/accent.

Restarting the Device

Recommendation: Restart your device once per week. To restart the device:
1. Select the Tools key and then select the Toolbox key.
2. Select Maint Menu and then select Power Management.
3. Select Restart and then select Yes at the confirmation prompt.

Powering Off the Device

Recommendation: Power off the device when it won't be used for more than a couple days or when it
will be transported in a carry case. If you plan to store it for at least a month, see "Storing Your Device"
in the Accent 800 Hardware Manual.
1. Select the Tools key.
2. Select the Shutdown option.
3. Select Yes at the confirmation prompt.
Accent 800/800-D Getting Started 12