Table of Contents
Advertisement
Select Mode
Manual
The laser lines are in a locked
position and will not self-level.
1.
Keep the Self-Leveling Switch
OFF and press the Laser Button
to turn the Laser on. The
Leveling Indicator will illuminate red.
Self-Leveling
1.
Turn the Self-Leveling Switch ON.
The Level will self-level within 5
seconds and the Leveling Indicator
will illuminate green.
note: If the Level is out of alignment,
the Leveling Indicator will illuminate
red and the laser line(s) will blink.
Move the Level horizontally until
Leveling Indicator illuminates green.
Page 6
For technical questions, please call 1-888-866-5797.
2.
Press the Laser Button to select
the desired line pattern:
a. Cross-Hair - 360° Level
and 360° plumb.
b. 360° Horizontal - Level.
c. 360° Vertical - Plumb.
3.
Aim and tilt the Level as needed.
4.
When finished, turn the Laser Button
and Self-Leveling Switch OFF. Store
the Level in a dry indoor area away
from children. If storing the Level for
a long period, remove the batteries.
2.
Press the Laser Button to select
the desired line pattern:
a. Cross-Hair - 360° Level
and 360° plumb.
b. 360° Horizontal - Level.
c. 360° Vertical - Plumb.
3.
Aim and tilt the Level as needed.
note: Tilting Level up and down may
cause it to become out of alignment.
Move the Level horizontally until
Leveling Indicator illuminates green.
4.
When finished, turn the Laser Button
and Self-Leveling Switch OFF. Store
the Level in a dry indoor area away
from children. If storing the Level for
a long period, remove the batteries.
Item 57933
Advertisement
Table of Contents
