Table of Contents
Advertisement
Operating instructions
read the EntirE iMpOrtant SaFEty inFOrMatiOn section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Mounting (Optional)
The Level can be mounted onto a
Tripod (sold separately) or attached
to a Mounting Bracket (included).
1.
Attach to Tripod's connecting screw.
2.
To attach the Mounting Bracket,
insert the Bracket's Screw into the
Laser Level's Tripod Connector.
Turn Knob to tighten until secure.
a. Attach the Mounting Bracket
to a magnetic surface, or
b. The Bracket may be attached
to a wall using appropriate
hardware (sold separately)
through its two holes.
General Operation
nOticE: Turn Self-Leveling Switch OFF
when moving Level to a different location.
1.
Install batteries as described in
"Battery Replacement" on page 7.
Item 57933
For technical questions, please call 1-888-866-5797.
Mounting Bracket
Magnet
Screw
Knob
2.
Set the Level on a flat, level surface,
mount to Tripod or Mounting Bracket.
tripod
Holes
Page 5
Advertisement
Table of Contents
