Service Traction System; Service Theft System - Buick 2006 LaCrosse Owner's Manual

This message will display only while the ignition is in
RUN. Press any of the DIC buttons to acknowledge
this message and to clear it from the screen.
This message will continue to display for two seconds
if it has not been acknowledged when the engine is
turned off. It will also re-display for two seconds if the
message has been acknowledged, but the condition still
exists when the engine is turned off.
If the condition still exists, the message will re-appear
when the engine is turned on.

SERVICE THEFT SYSTEM

This message will display when there is a problem
with the theft-deterrent system programmed in the key.
A fault has been detected in the system which means
that the system is disabled and it is not protecting
the vehicle. The vehicle usually restarts; however,
you may want to take the vehicle to your GM dealer
before turning off the engine. See PASS-Key
Operation on page 2-21 for more information.
This message will display and a chime will sound
only while the ignition is in RUN. Press any of the
DIC buttons to acknowledge this message and to
clear it from the screen.
3-70
This message will continue to display for two seconds
if it has not been acknowledged when the engine is
turned off. It will also re-display for two seconds if the
message has been acknowledged, but the condition still
exists when the engine is turned off.
If the condition still exists, the message will re-appear
when the engine is turned on.

SERVICE TRACTION SYSTEM

If your vehicle has the traction control system, this
message will display when the system is not functioning
properly. A warning light will also appear on the
instrument panel cluster. See Traction Control System
(TCS) Warning Light on page 3-39. See Traction Control
System (TCS) on page 4-10 for more information.
Have the traction control system serviced by your
GM dealer as soon as possible.
This message will display only while the ignition is in
®
III RUN. Press any of the DIC buttons to acknowledge this
message and to clear it from the screen.
This message will continue to display for two seconds
if it has not been acknowledged when the engine is
turned off. It will also re-display for two seconds if the
message has been acknowledged, but the condition still
exists when the engine is turned off.
If the condition still exists, the message will re-appear
when the engine is turned on.