Table of Contents
Advertisement
WORK AREA
When assembling, installing, or removing the bike hitch rack
• Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause
accidents.
• Keep children and bystanders away while assembling, installing or removing the bike hitch
rack. Distractions can cause loss of control, so visitors should remain at a safe distance from the
work area.
• Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards
near your work area, particularly those hazards below the work surface hidden from the
operator's view that may be unintentionally contacted and may cause personal harm or property
damage.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when using the bike hitch rack
• Secure all bicycles loaded on the bike hitch rack.
• Never use with a trailer jack or 5
BIKE HITCH RACK USE AND CARE
• Do not modify the bike hitch rack in any way . Unauthorized modification may impair the
function and/or safety and could affect the life of the equipment. There are specific applications
for which the bike hitch rack was designed.
• Always check for damaged or worn parts before using the bike hitch rack. Broken parts
will affect the bike hitch rack operation. Replace or repair damaged or worn parts immediately.
• Do not exceed the bike hitch rack 120-lb. load capacity.
ASSEMBLY
Recommended Tools:
1 ea.-17mm combination wrench
1 ea.-19mm combination wrench
1 ea.-24mm combination wrench
TIP: Refer to parts diagram during assembly to see fully assembled product.
Step 1: Assemble turn plate and base
Hardware Needed:
Qty 1: Elbow Plate (Part #22)
Qty 1: Hitch Base (Part #23)
Qty 2: Ф12 washer (Part #10)
Qty 1: Nut M12 (Part #11)
Qty 1: Bolt M12X100 (Part #12)
Qty 1: Bolt M16X75 (Part #13)
Qty 1: Ф16 washer (Part #14)
Qty 1: Nut M16 (Part #15)
th
wheel.
Page of 11
3
Advertisement
Table of Contents
