Advertisement
Quick Links
Operating Instructions
Winterhalter Gastronom RoMatik 150
Summary:
1.
Intended purpose.....................................................................................................................................1
2.
Installation and initial start-up ..................................................................................................................2
3.
Safety instructions for the operator .........................................................................................................2
4.
Indicating elements..................................................................................................................................3
5.
Operating the appliance ..........................................................................................................................3
6.
Caring for the appliance ..........................................................................................................................3
7.
Error messages .......................................................................................................................................4
8.
Keeping the membrane moist..................................................................................................................6
9.
Requirements for the Untreated Water (raw water) ................................................................................6
10.
Technical data .........................................................................................................................................6
1. Intended purpose
The Winterhalter Gastronom RoMatik 150 is designed for softening cold water (max. 25°C) in
preparation for use in commercial dishwashers.
The RoMatik 150 may only be connected to a dishwasher.
The feed water must conform to the specifications of the Ordinance on Drinking Water (see Page 6).
The appliance may only be used for this purpose and in accordance with the operating instructions provided.
Any change in the use or design of the RoMatik 150 without our written consent shall exempt us from all
guarantee and product liability obligations.
89005232-05
03/12 sch
In order to guarantee many years of trouble-free
service, we recommend that you sign a mainte-
nance contract with your local Winterhalter
service centre.
Winterhalter Gastronom GmbH
Tettnanger Str. 72
D-88070 Meckenbeuren
1
Advertisement
Summary of Contents for Winterhalter Gastronom RoMatik 150
-
Page 1: Table Of Contents
The appliance may only be used for this purpose and in accordance with the operating instructions provided. Any change in the use or design of the RoMatik 150 without our written consent shall exempt us from all guarantee and product liability obligations. -
Page 2: Installation And Initial Start-Up
2. Installation and initial start-up The RoMatik 150 must be installed and connected to the on-site supply and waste pipes by a trained fitter in accordance with the ”Installation Instructions for Winterhalter Gastronom RoMatik 150”. The initial start-up procedure and briefing of the customer must be carried out according to the ”Start-up Instructions for Winterhalter Gastronom RoMatik 150”. -
Page 3: Indicating Elements
This is not an error. 6. Caring for the appliance Only use a damp cloth and no other cleaning agents on the RoMatik 150. Do not rinse the appliance with water. Check all water connections regularly. Condensation beneath the filter behind the front cover is not a sign of leakage, and can be simply wiped dry. -
Page 4: Error Messages
7. Error messages To protect both the user and the appliance itself from incorrect use, the RoMatik 150 is equipped with various built-in safety devices for interrupting the operation of the appliance. The following table explains the possible causes of common warnings. If the cause of the error cannot be eliminated, the Winterhalter after-sales service should be contacted. - Page 5 20 minutes and after 4 hours * Starting with Lot No. 70 600 001, the RoMatik 150 automatically starts when a malfunction arises because of water pressure that is too low. The RoMatik 150 can also be manually restarted by pressing the calibration button until the "filter I" and "stop"...
-
Page 6: Keeping The Membrane Moist
8. Keeping the membrane moist If the RoMatik 150 is to be taken out of operation for more than 2 weeks (disconnected from power and water supply), the membrane has to be moistened by Winterhalter after-sales service, who should be notified again before operation is resumed after the break.