Electrolux EW9W161B User Manual page 43

16.2 Possible failures
Problems indicated by alarm codes
Message
: the appliance does
not fill with water.
: the appliance does
not drain the water.
: please check the
door!
: the mains supply is
unstable.
: check the air filter.
Possible solution
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is
not too low. For this information, contact your local
water authority.
• Make sure that the water tap is not clogged or is
furred with lime-scale.
• Make sure that the filter of the inlet hose and the fil‐
ter of the valve are not clogged. Refer to 'Care and
cleaning'.
• Make sure that the inlet hose is not damaged.
• Make sure that the connection of the water inlet
hose is correct.
• Make sure that the drain hose is not damaged.
• Make sure that the drain filter is not clogged. Clean
the filter, if necessary. Refer to 'Care and cleaning'.
• Make sure that the connection of the drain hose is
correct.
Make sure that the appliance door is not open or
closed correctly.
If the appliance is overloaded, remove
some items from the drum and/or keep
pressed the door while touching the Start/
Pause button until the indicator
flashing (see the picture below).
Wait until the mains supply is stable. The appliance
automatically starts operating.
• Make sure that the air filter has been cleaned.
• Make sure that the air filter is correctly inserted.
ENGLISH 43
stops