Dog Status Icons; Starting And Ending A Hunt; Marking Your Truck Location; Deleting Your Truck Location - Garmin ALPHA 10 Owner's Manual

Dog Status Icons

Starting and Ending a Hunt

You can start and end a hunt on your handheld device.
NOTE: When your device is connected to the Garmin Explore app, the hunt data is automatically uploaded to
your Garmin Explore account when you end a hunt.
1 Press the menu button.
2 Select Start Hunt.
3 Select the hunt timer to end the hunt.
4 Select Yes.

Marking Your Truck Location

You can mark the location of the truck, so you can navigate back to your truck after the hunt.
1 Press the menu button.
2 Select Mark Truck.

Deleting Your Truck Location

You must delete the previously marked truck location before you can mark a new location.
1 Press the menu button.
2 Select the marked truck.
3 Select Delete.
You should research and investigate the training methods best suited for you, your dog, and your needs. This
manual provides some basic guidelines for training, but each dog has unique training needs.
When used properly, the Alpha 10 training system is a very effective training tool to aid your dog in reaching its
full potential. The use of the training system should be part of an overall training program.
Begin training your dog on a leash, without the Alpha 10 training system. You should train your dog how to heel,
sit, and come to you. After the dog understands these three basic commands, you can begin training with the
dog collar device and the leash. Finally, when the dog consistently obeys commands using the leash and collar,
you may be able to remove the leash to train with only the dog collar device.
1
The unknown status icon indicates that the handheld device cannot communicate with the dog collar device.
12
Sitting
On point
Treed
1
Unknown

Dog Training

NOTICE
Dog Training