QSI Quantum Revolution-A User's Operation Manual page 12

PART OF RESETING AND WORKING WITH THIS UNIT IN ANALOG MODE IS THROUGH A
MAGNETIC REED SWITCH WHICH IS AN OPTIONAL PART. IF YOU FEEL YOU NEED THIS PART PLEASE NOTIFY YOUR DEALER.
There is another simple option. Solder two wires to the reed switch pads and touch them together momentarily to
Your locomotive can be programmed using a standard power pack.
All advanced operations are easily programmed using your standard HO power pack. After entering
programming (described below), the various features are selected and operated by using the direction switch.
Program
Option Name
Option
(Default Value)
#'s (POP's)
System Volume
1
(16, Max)
2
(0, No Load)
3
(Normal)
Directional
4
(Normal)
5-7 Reserved
8 V-Start (8.5v)
9 V-Max (12v)
Throttle Mode
10
Programming
11
12
3b: Analog Programming
simulate the reed switch function, see Pg-7.
Message When
Entering Option
"Volume equals X"
Load
"Load equals X"
"Helper Equals"
"Normal"
Helper "Lead"
"Mid"
"End"
"Pusher"
"Direction Equals
"Reserved"
"V-Start Equals X"
"V-Max Equals X"
"Mode Equals X"
(RTC)
"Warning-about to
Reset reset"
About "Model Number"
Sets System volume (17 level) where level 16 is
Selects the starting and stopping inertia for both Regulated
Standard Throttle Control (STC). Level 0 (no load), Level 1-
acceleration to full speed from 15 seconds to 210 seconds
Selects Normal, Lead, Mid, End, or Pusher Helper in
Normal Locomotive has all sounds and lights enabled.
Lead locomotive has all sounds enabled and Reverse Light
Mid Helper has Horn, Bell and all lights disabled11.
End Helper has Horn, Bell and all lights disabled except
Pusher has Reverse Light on all the time as train warning
Selects if the features associated with the locomotive's
direction are "Normal" or"Reversed".
X"
Sets track voltage at which locomotive will leave Neutral.
Sets track voltage at which full track power is applied to motor.
Selects between Regulated Throttle Control (RTC)
and Standard Throttle Control (STC)
Selects between Regulated Throttle Control (RTC) and
Each Quick or Slow Operation provides progressive
information about Quantum Model Number, Software
Version, and Software Release Date.
Option Description
max and level 0 is off.
Throttle Control (RTC) and
15, increasing Load with
in RTC and from 3 seconds
to 45 seconds in STC.
consists.
disabled.
Reverse Light.
light. Horn, Bell and all other
lights are disabled.
(See Example below)
Standard Throttle Control (STC).
12