Page 2
NOTE Please check you have all hardware before assembling. If you are missing any hardware, please contact the store of purchase. Please ensure you have the name of the item, required hardware part and quantity. Please retain your receipt as proof of purchase to validate your warranty. CAUTION Do not tighten screws before all screws are in the right place.
Page 3
STEP 1 Insert six (6) PINS (B) into pre-drilled holes on end panels using your screwdriver. END PANEL END PANEL STEP 2 Insert four (4) ADJUSTABLE FEET (A) into pre-inserted threaded sleeve. STEP 3 Insert six (6) PINS (B) into pre-drilled holed on each end of your modesty panel using your screwdriver.
Page 4
STEP 4 Aligns the PINS (B) on the modesty panel with the pre-inserted CAM HOUSING on the end panels and tighten with your screw driver by rotating screw to the right. IMPORTANT NOTE: The offset pins need to be facing in front/inside of the desk. If you cannot access the CAM HOUSING screw for tightening then you need to rotate the modesty panel.
This manual is also suitable for:
Vd189Ow codesCpveldskgbCpveld15bwCpveldskgrCpveldskwh...
Show all