Components - BBB MARK-B 1 User Manual

Do not use or store the product in a location exposed to open flames.
Do not expose or store the product in a location subject to high temperature and high humidity.
Prevent water and dust from entering the device.
Do not apply excessive force, drop or step on the product.
Aluminium tapes have been attached on the top of cartridges to help sustain the quality of the cartridges. Only remove these tapes upon usage.
Avoid dropping the device while moving it.
Do not assemble or modify the analyzer.
The analyzer is not water-resistant. Do not wash it with water or touch it with wet hands.
Do not use the product to diagnose specific illnesses and conduct screening tests, such as neonatal screening.
Use the analyzer only to assist medical decision-making.
Keep this product out of the reach of children.
When discarding the analyzer, discard in a safe place in accordance with local regulations or accreditation requirements.
This test has not been FDA-cleared or approved;
This test has been validated internally by BBB and shall not be changed without prior concurrence from the FDA.
This test has been authorized only for the detection of antigens from SARS-CoV-2, not for any other viruses or pathogens.

1-4. Components

The following are the components you should check upon opening the package of the MARK-B™ 1 analyzer.
Please check that all components are included in the box.
Please contact the purchase location if any of `the following components are not included or damaged.
Components provided in the box:
MARK-B™ 1 analyzer
Check Cartridge
User manual
Components not provided in the box:
Power adapter
Printer
Scanner
Control solutions
Test cartridges
Reagent solutions
Product Introduction
4