f
f
f
Inserting Batteries (remote control)
1. Open the battery compartment.
2. Insert two 1.5V LR03/AAA batteries (not supplied)
3. Replace the battery compartment cover, making sure it
Cleaning and care
Attention! Before cleaning the device, switch it off and
disconnect it from the power supply. .
Attention! Never immerse the device in liquids.
Caution! Do not use alcohol, acetone, benzine, abrasive
cleaning agents, etc. to clean plastic components. Do not
use hard brushes or metal objects.
Only wipe the device with a dry cloth.
P21065_INTRA_LED_MiniProjector_210719.indd 5
friendly way and according to the applicable legal
regulations.
Batteries are very dangerous if swallowed. Please keep
the batteries and the device components away from
children at all times. If a battery is swallowed, seek
medical attention immediately.
Batteries must not be recharged or activated with other
means, dismantled, thrown into fire or short-circuited.
Remove the battery prior to disposing of the device.
into the battery compartment. Please note the polarity
diagram printed inside the battery compartment.
is closed firmly.
5
20/7/2021 3:30 PM