Table of Contents
Advertisement
ChARGE PROJECTOR
Stick the jack plug of the mains adaptor into the DC 5V
jack on the back of the projector.
Connect the mains adaptor to an appropriate power outlet.
The projector must be switched off for charging.
The charge indicator next to the jack flashes red.
When the battery is charged, the charge indicator continu-
ously shines red.
Note the battery indicator in the top right corner of the
home screen, to check if the battery needs charging.
TuRN PROJECTOR ON/OFF
To turn the projector on, press and hold the power switch
ON/OFF on the left side of the device for two seconds.
To switch the projector off, press the power button ON/
OFF on the left side of the device or press the Power
button
on the remote control.
ADJuST FOCuS
When the projector is switched on, turn the focus wheel at
the back of the device to adjust the focus.
ADJuST vOLuME
Press the volume + button on the remote control to
increase volume.
t
Press the volume - button on the remote control to
decrease volume.
MuTE vOLuME
To temporarily stop the sound, press the mute button
creen
on the remote control. Press the button again to start
the sound again.
11
P21065_INTRA_LED_MiniProjector_210719.indd 11
20/7/2021 3:30 PM
Advertisement
Table of Contents
