1773/1775/1777
Users Manual
Use the wire clips for easy identification of the four current probes. Apply the clips that are
appropriate for your local wiring codes on both ends of the current probe cable. See
Tilt Stand
The Product includes a tilt stand that positions the display at a good angle for use on a tabletop
surface. See
Figure
Storage
When not in use, keep the Analyzer in the protective storage bag/case. The bag/case has
sufficient space for the Analyzer and all the accessories.
If the Analyzer is stored for an extended period of time or is not in use for a long time, you
should charge the battery at least once every six months. For more information, see
Maintenance.
10
Figure 6. Wire Clips
7.
Figure 7. Tilt Stand
Figure
6.