Dic Vehicle Personalization - Buick 2004 LeSabre Owner's Manual

DIC Vehicle Personalization

The DIC can be used to program the following personal
choice features available with your vehicle:
•
Automatic Door Locks
•
Window Lock Out
•
Security Feedback
•
Delayed Locking
•
Perimeter Lighting
•
Memory Seats
•
Outside Curb View Assist Mirror
•
Driver ID
•
Language Selection
The personal choice settings displayed on the DIC are
determined by the transmitter used to enter the
vehicle. Each remote keyless entry transmitter was
pre-programmed to belong to DRIVER 1 or DRIVER 2
and is numbered on the back. After the unlock button on
a remote keyless entry transmitter is pressed and the
ignition is in RUN, the DIC will display the identified
driver and recall the settings previously programmed for
that driver. The settings can also be recalled by
briefly pressing one of the MEMORY buttons located on
the driver's door.
3-50
If you unlock the vehicle using your door key instead of
your transmitter, the DIC will not change drivers and
will recall the information from the last transmitter used
or the last driver using the memory seat controls. If
this happens and you were not the last driver of
the vehicle, simply press your correct driver number on
the memory seat controls or press the unlock button
on your remote keyless entry transmitter.
Use the following steps for personalization programming
instructions.
1. Turn the ignition on and keep the transaxle in
PARK (P).
2. Inform the DIC which driver you are by pressing the
unlock button on your remote keyless entry
transmitter or the appropriate memory seat control.
3. Press and hold the ENG/MET button for five
seconds. WELCOME TO BUICK OPTION
FEATURE will appear in the display.
4. The first choice to be made will be DRIVER
ID 1 or 2. Press the ENG/MET button to toggle
between your selections within a display and
RESET to choose the current selection and move
on to the next personal choice feature.