Climate Controls Personalization; Steering Wheel Climate Controls - Buick 2004 LeSabre Owner's Manual

Operation Tips
•
Clear away any ice, snow or leaves from the air
inlets at the base of the windshield that may
block the flow of air into your vehicle.
•
Use of non-GM approved hood deflectors may
adversely affect the performance of the system.
•
Keep the path under the front seats clear of objects
to help circulate the air inside of your vehicle more
effectively.

Steering Wheel Climate Controls

w x
TEMP (Temperature): Press the up or down
arrow on this switch to increase or decrease the
temperature.
If your vehicle has this
feature, you can control
the temperature function
by using the switch located
on your steering wheel.

Climate Controls Personalization

If your vehicle is equipped with this feature, up to two
drivers are able to store and recall climate control
settings for the temperature, the fan speed and the
direction of the airflow.
Memory buttons 1 and 2 are located on the driver's
door panel and correspond to the numbers 1 or 2 found
on the back of each remote keyless entry transmitter.
To store settings, do the following:
1. Select the desired temperature, fan speed and
airflow mode. If desired, a separate temperature
setting may also be selected for the front seat
passenger. For information on how to do this, see
Dual Automatic Climate Control System on
page 3-26.
2. Locate memory buttons 1 and 2 on the driver's
door panel.
3. Press the memory button on the door panel that
corresponds to the number on the back of the
transmitter you are programming, until you hear two
beeps. The beeps confirm that your selection has
been saved and can now be recalled. For more
information on the memory feature, see Memory
Seat and Mirrors on page 2-44.
Follow these steps each time you want to change the
stored settings.
3-31