Yamaha PSR-F52 Owner's Manual page 7

[ ] (Standby/On) switch
Pressing this turns on and the display lights. To set the
power to standby, hold down for about one second.
[PART MUTE], [SYNC START]
[SHIFT]
To call up the alternate function of certain
buttons, simultaneously hold down
[SHIFT] and press the corresponding button.
2
Use CATEGORY [
desired Song/Style/Voice.
You can check the Song/Style/Voice categories on the front
panel.
Selects previ- Selects next
ous category category
3
Play the keyboard, or press [START/STOP] to start
the Song/Style.
To stop the Song or Style, press [START/STOP] again.
* In Style playback, an Intro plays back first, and then only the
rhythm part plays back, because of the Auto Intro/Ending function
(page 9). Some Styles do not include a rhythm part.
* For further information on Song/Style/Voice, see page 8.
 Page 8
[TEMPO/TAP]
Allows you to change the tempo of the Song, Style, and
Metronome with [+]/[−].
Tap Function
With Song/Style stopped, tap [TEMPO/TAP] several times
to start playback at the tapped tempo (four times for a 4-
beat Song/Style. etc.) or tap it twice during playback to
change the tempo. Tempo can be set from 32 to 280.
]/[ ]or [+]/[−] to select the
Selects previ- Selects next
ous Song/ Song/Style/
Style/Voice Voice
[SONG]/[STYLE]/[VOICE]
 Pages 6, 8
Display
 Page 6
Backup and Initialization
Backup Parameters
The following settings will be maintained even if the power is turned off.
• Master Volume
• Volume Limit
• Tuning
Initialization
To initialize the backup parameters, press the [
while holding down the highest white key to turn the power on. "CLr"
appears on the display.
Basic Operations
CATEGORY
[ ]/[ ],
[+]/[−],
[START/STOP]
 Page 6
METRONOME
To start/stop the Metro-
nome, simultaneously
hold down [SHIFT] and
press this button.
• Chord Fingering Type
• Auto Power Off
• Battery Type
] (Standby/On) switch
PSR-F52 Owner's Manual
7