Table of Contents
Advertisement
9. Make sure the tire is stored securely. Push, pull, and
then try to rotate or turn the tire. If the tire moves,
use the folding wrench to tighten the cable.
Put back all tools as they were stored in the jack storage
compartment and put the compartment cover back on.
To put the cover back on, slip the tabs on the side of
the cover into the cover opening. Push the cover in place
and push down the tabs on the cover so that it rests
in the groove. This secures the cover in place.
When you replace the compact spare with a full
-
tire, reinstall the bolt
on wheel covers or the center cap
(if equipped). Tighten them "hand tight" over the wheel
nuts, using the folding wrench.
-
size
5-35
Advertisement
Chapters
Table of Contents
