Exiting Programming Mode - Buick 2002 Rendezvous Owner's Manual

Exiting Programming Mode

To exit programming mode, do one of the following:
D
Press the odometer button, while in odometer mode,
for two seconds, or
D
turn the ignition key out of ON, or
D
do not program any commands for one minute while
in programming mode, or
D
shift out of PARK (P). See "Shifting Out of
PARK (P)" in the Index.
The programming mode message will turn off to let you
know that you are no longer in the programming mode.
Liftgate
CAUTION:
It can be dangerous to drive with the liftgate
open because carbon monoxide (CO) gas can
come into your vehicle. You can't see or smell
CO. It can cause unconsciousness and even death.
If you must drive with the liftgate open or if
electrical wiring or other cable connections
must pass through the seal between the body and
the liftgate:
D
Make sure all other windows are shut.
D
Turn the fan on your heating or cooling
system to its highest speed with the setting
-
on bi level (outside air button is pressed).
That will force outside air into your vehicle.
See "Comfort Controls" in the Index.
D
If you have air outlets on or under the
instrument panel, open them all the way.
See "Engine Exhaust" in the Index.
2-21