3D Glasses - Sony VPL-VW90ES Operating Instructions Manual

3D Glasses

Slide switch
1
Set the switch for a comfortable fit (1
page 40).
2 Battery cover
Detach the cover when replacing the
battery (1 page 80).
Before use: Remove
the battery's insulating
sheet before using the
product for the first time.
3 LED indicator
Flashes one time every 3 seconds: Power
on
Flashes three times every 3 seconds:
Low battery. Battery capacity is almost
running out.
Flashes three times: Power off
4 IR sensor
Receive signals from the 3D Sync
Transmitter.
This part receives IR
(infrared rays) from the
3D Sync Transmitter.
IR's entry angle differs according to
distance or usage environment.
Note
Please keep this face clean.
Filter attachment
5
Filters are attached to view the 3D video
images.
Note
Do not remove the filters. You cannot view
the 3D video images without them.
6 Power button
Power on: Press once
Power off: Hold power button down for
2 seconds
* Auto power off: More than 5 minutes
without IR signal
7 Nose pad
Adjust the nose pad for a comfortable fit.
8 Temple frames
You can bend (adjust) the temple frames
for a comfortable fit.
11