Maintenance - Milwaukee M18 BMS12 User Manual

Do not dispose of used battery packs in the household refuse or by burning them.
Milwaukee Distributors off er to retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit risk).
Use only System C18 chargers for charging System C18 battery packs. Do not use battery
packs from other systems.
Never break open battery packs and chargers and store only in dry rooms. Keep dry at all
times.
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately
seek medical attention.
No metal parts must be allowed to enter the battery section of the charger (short circuit
risk).
SPECIFIED CONDITION OF USE
The power tool is intended for cutting sheet metals without loss due to metal chips. It is
suitable for curved and straight cuts.

MAINTENANCE

Clean dust and debris from tool. Keep tool handles clean, dry and free of oil or grease. Use only
mild soap and a damp cloth to clean the tool since certain cleaning agents and solvents are
harmful to plastics and other insulated parts. Never use fl ammable or combustible solvents
around tools.
The ventilation slots of the machine must be kept clear at all times.
Use only Milwaukee accessories and Milwaukee spare parts. Should components need to be
replaced which have not been described, please contact one of our Milwaukee service agents
machine type printed as well as the six-digit No. on the label and order the drawing at your local
service agents.
SYMBOLS
CAUTION! WARNING! DANGER!
Please read the instructions carefully before starting the machine.
Wear gloves!
Always wear goggles when using the machine.
Remove the battery pack before starting any work on the
machine.
Accessory - Not included in standard equipment, available
as an accessory.
Do not dispose of electric tools together with household waste
material. Electric tools and electronic equipment that have reached
the end of their life must be collected separately and returned to an
environmentally compatible recycling facility. Check with your local
authority or retailer for recycling advice and collection point.
12 English