LG -D385 Service Manual page 102

3.3.2.4 Checking RF Signal Path (Saw Filter)
Check TP1(C1109) at FL1101
Check if there is any major difference referring
To Figure 3.1.1(b) Is any signal detected at
Is any signal detected at that point?
All GSM900 Rx check is complete.
If the phone sill do not work ,replace main board
Center Frequency :
942.6MHz
LGE Internal Use Only
START
that point?
Yes
Yes
Figure 3.1.1 (b)
- 102 -
3. TROUBLE SHOOTING
No
Check C1108
No
Replace FL1101
TP1
Copyright © 2014 LG Electronics. Inc. All right reserved.
Only for training and service purposes