Buick 1994 LeSabre Owner's Manual page 139

Clock
To set the clock,
0
Press the SET button.
Within
5 seconds, press and hold SCAN until the
correct hour appears on the display.
appears on the display.
Press and hold SEEK 4 or
until the correct minute
To Adjust the Tone
BASS adjusts the bass response up or down. TREB
adjusts the treble response up or down. If the station is
weak or noisy, adjust the treble down to reduce the
noise.
To Play a Cassette
Your tape player is built to work best with tapes that are
30 to 45 minutes long on each side. Tapes longer than
that are so thin they may not work well in this player.
With the radio on, press a tape into the slot marked
AUTO REVERSE (tape side goes in first).
Once the tape is playing, use the upper and lower knobs
for volume, balance, and fade just as you did for radio.
The arrow in the graphic display above the word TAPE
indicates which side of the tape is being played. When
the end of the tape is reached, it will automatically
reverse and play the other side of the tape.
Program
To go from one side of the tape to the other, press the
PROG button. This button will also stop REV, FWD,
PREV, or NEXT and play the tape.
Cr02
This button sets the tape bias. When playing high bias
chrome or metal tapes labeled Cr02, press the button to
turn on the CrO2. Cr02will appear in the display. When
playing standard bias tapes, press again to turn off the
Cr02.
Reverse
To reverse the tape, press REV and the tape will rapidly
reverse to the beginning or until you press the PROG or
REV button again. The radio will play during reverse.
r
orward
To advance the tape, press FWD and the tape will
rapidly go forward to the end of the tape or until you
press the PROG or FWD button again. The radio will
play during forward.
137